How much does a electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finisher make?
The median electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finisher in the United States earns $44,040 per year, about $21.17 an hour. That is the midpoint of the profession: half of all electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers earn more, and half earn less.
Source: BLS OEWS, May 2024. SOC code 51-2028.
Electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finisher salary range
Pay for electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers spans a wide band. The lowest paid 10 percent earn under $34,110 a year, while the highest paid 10 percent take home more than $61,080. The average (mean) wage of $45,930 runs a bit higher than the median, which is normal for jobs where a group of top earners pulls the average up.
| Percentile | Annual | Hourly | |
|---|---|---|---|
| 10th percentile | $34,110 | $16.40 | Lowest paid |
| 25th percentile | $37,450 | $18.00 | |
| Median (50th) | $44,040 | $21.17 | Midpoint |
| 75th percentile | $49,830 | $23.96 | |
| 90th percentile | $61,080 | $29.36 | Highest paid |
Figures are national wage estimates for electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers (SOC 51-2028), U.S. Bureau of Labor Statistics, OEWS, May 2024.
Electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finisher salary by state
Where you work changes the paycheck. Electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers earn the most in Maryland at $50,980 a year, and the least in Louisiana at $35,860. The table below lists every state with published data, ranked by median annual salary.
| State | Median annual | Employed |
|---|---|---|
| Maryland | $50,980 | 1,250 |
| Washington | $50,480 | 7,280 |
| Massachusetts | $47,710 | 11,030 |
| Vermont | $47,610 | 610 |
| Colorado | $47,000 | 4,280 |
| New Hampshire | $46,940 | 3,560 |
| California | $46,720 | 38,580 |
| Oregon | $46,590 | 3,090 |
| Minnesota | $46,240 | 6,760 |
| Ohio | $45,860 | 14,260 |
| Maine | $45,680 | 660 |
| Wisconsin | $45,470 | 10,310 |
| Michigan | $45,080 | 11,180 |
| Utah | $45,050 | 2,810 |
| Montana | $44,750 | 210 |
| Iowa | $44,390 | 3,290 |
| New York | $43,930 | 13,270 |
| Connecticut | $43,870 | 3,390 |
| Arizona | $43,220 | 5,130 |
| Pennsylvania | $43,180 | 12,600 |
| Oklahoma | $43,090 | 2,720 |
| Rhode Island | $42,970 | 1,070 |
| Idaho | $42,820 | 1,020 |
| Missouri | $42,760 | 5,260 |
| South Carolina | $42,440 | 3,820 |
| Kentucky | $42,270 | 2,020 |
| Arkansas | $42,110 | 1,910 |
| North Carolina | $41,870 | 7,160 |
| North Dakota | $41,470 | 440 |
| Virginia | $41,360 | 4,840 |
| Georgia | $40,900 | 5,480 |
| Texas | $40,290 | 16,470 |
| New Jersey | $40,220 | 7,350 |
| Tennessee | $40,040 | 1,640 |
| Illinois | $39,880 | 14,660 |
| Indiana | $39,560 | 6,700 |
| Wyoming | $39,300 | 100 |
| Nevada | $39,160 | 940 |
| West Virginia | $38,990 | 540 |
| South Dakota | $38,860 | 1,610 |
| Kansas | $38,690 | 3,570 |
| Nebraska | $38,180 | 1,110 |
| Alabama | $38,100 | 4,580 |
| Delaware | $37,890 | 500 |
| Florida | $37,860 | 8,760 |
| Mississippi | $37,840 | 2,320 |
| New Mexico | $36,350 | 540 |
| Louisiana | $35,860 | 410 |
State median wages for electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers (SOC 51-2028), U.S. Bureau of Labor Statistics, OEWS state files, May 2024. States where the BLS does not publish a median are not shown.
Job outlook for electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers
The BLS projects employment of electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers to grow 5% from 2025 to 2035. That is about as fast as the 3.5% average for all occupations. That works out to roughly 246,300 jobs in 2025 moving toward 258,700 by 2035.
Across the decade, the BLS expects about 25,900 openings a year for electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers. Most come from the need to replace workers who move to other jobs or leave the workforce, on top of any new positions from growth.
Source: U.S. Bureau of Labor Statistics, Employment Projections program, 2025-35 (Table 1.2, Occupational projections and worker characteristics).
How to become an electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finisher
The typical entry-level education for electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers is a high school diploma or equivalent, according to the BLS. New hires typically complete moderate-term on-the-job training to reach full competency.
A four-year college degree is usually not required to start, which makes this one of the jobs you can enter without a bachelor's degree. See more high paying jobs without a degree .
Education, training, and experience data: U.S. Bureau of Labor Statistics, Employment Projections program.
What affects how much an electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finisher earns
Industry, shift, certifications, and region drive pay, along with overtime. Skilled operators and workers in unionized plants sit near the top of the range.
Location is one of the clearest factors. The gap between the top paying state (Maryland, $50,980) and the lowest (Louisiana, $35,860) shows how much geography alone can move the number, before experience or specialization.
About 261,140 people work as electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers in the United States. At $44,040 a year, the job pays below the $49,500 median for all U.S. jobs.
Electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finisher salary FAQ
How much does an electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finisher make an hour?
The median hourly wage for an electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finisher is $21.17. The middle half of electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers earn between $18.00 and $23.96 per hour.
What is the highest electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finisher salary?
The highest paid 10 percent of electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers earn more than $61,080 per year. Top earners usually have the most experience and work in the best paying regions and industries.
How much does an electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finisher make a year?
The median annual salary for an electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finisher is $44,040. The average (mean) wage of $45,930 runs a bit higher than the median, which is normal for jobs where a group of top earners pulls the average up.
Is being an electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finisher a well paid job?
At $44,040 a year, an electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finisher earns below the $49,500 median for all U.S. jobs. About 261,140 people work as electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers in the United States.
Which state pays electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers the most?
Maryland has the highest median salary for electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers at $50,980 a year. Washington ($50,480) and Massachusetts ($47,710) follow. State medians come from the BLS OEWS state files, May 2024.
Is being an electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finisher a good career?
Employment of electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers is projected to grow 5% from 2025 to 2035, about as fast as the 3.5% average for all occupations. The BLS projects about 25,900 openings each year, from growth and from workers leaving the occupation.
Do you need a degree to become an electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finisher?
No. The BLS lists the typical entry-level education for electrical, electronic, and electromechanical assemblers, except coil winders, tapers, and finishers as a high school diploma or equivalent, so a four-year degree is usually not required to start.
Related salaries
See more in Production & Manufacturing salaries or browse the highest paying jobs in the U.S.